It is possible to implement Ethernet communication for the HP1000 and HP2000, if you follow the steps below.
By selecting the HP3000 or HP4000 in the software, Ethernet connectivity can be handled easily. The software will function correctly with these settings, even though the HandPunch is an HP1000 or HP2000.
Select HP3000 or HP4000 in the Pendulum device configuration to activate TCP/IP connectivity.
HP reader address must be 0 (Zero). All other numbers are rejected by the NET/232 adapter.
NET/232 adapter port must be changed from 10001 to 3001.
Follow NET/232 setup in the adapter user guide.
Contact your local dealer orAcroprint Support for additional assistance if needed. Acroprint support is available Monday - Friday (excluding holidays), 8:00am until 5:00pm (Eastern). Click here to email our Support Department, or call us at 1-800-334-7190 (Canada: call 1-866-514-3249). Note that per-incident charges may apply for telephone support.
Avoid per-incident charges for telephone support, get priority handling of support tickets and gain other valuable benefits — contact Acroprint today at 1-800-334-7190 for more information about a Software Support Contract.