Basic programming instructions

The programming mode is entered by unlocking and removing the top cover from the ATR 440 with the power on. The IN/OUT buttons on the clock serve as function keys in the programming mode. The functions of each button are listed below and on the inside cover of the recorder.

Setting Daylight Saving Time (must be set each year)

Daylight Saving Time is not automatically updated each year. You will need to reset it each calendar year. You must set both the starting and ending dates for Daylight Saving Time. The clock will then automatically advance forward one hour on the first date you set, and revert backwards one hour on the second date you set.

1. Open the top cover. The digital display reads P1.
   
2. Press the F4 button.The digital display shows a 1 as the left-most character, representing the first or starting date of Daylight Saving Time. The hour, next to the 1 on the left-hand side of the display, flashes.
   
   Press the + or – button to change when the time change takes place. Currently, the U.S. standard is 2:00 am on the second Sunday in March and on the first Sunday in November. Any hour between midnight and 9:00 am may be chosen as the time for the clock to advance forward or to revert backwards. To accept the hour, press the E button.
3. The month flashes next.
   
   Press the + or – button to change the starting month. If you are setting the standard U.S. Daylight Saving Time, this should be the month of March. Press the E button to accept the month.
4. The day of the month will flash next.
   
   Press the + or – button to change the day. If you are setting the standard U.S. Daylight Saving Time, this should be the second Sunday in March of the current year. Press the E button to accept the date.
5. You will now start setting the Daylight Saving Time end date. The digital display now shows a 2 as the left-most character. This represents the second setting or ending date. The hour on the left-hand side of the display flashes.
   
   Press the + or – button to change to the hour which you want the time change to take place. To accept the hour, press the E button.
6. The month flashes next. Press the + or – button to change the ending month. If you are setting the standard U.S. Daylight Saving Time, this should be the month of November. Press the E button to accept the month.
7. The day of the month will flash next. Press the + or – button to change the day. If you are setting the standard U.S. Daylight Saving Time, this should be the first Sunday in November of the current year. Press the E button to accept the date.
8. The display will turn off. You may close the top cover or choose to program another setting.

Setting the time manually

1. Open the top cover. The digital display reads P1. Press the F2 button.
   
2. Either 12 or 24 will be flashing on the left hand side of the display to indicate 24-hour (military) time display or 12-hour time display.
   
   Press the + or – button to change the time display to the desired format. Press the E button to accept the time display format.
3. The hour flashes next. Press the + or – button to change the hour as needed. When correct, press the E button to accept the hour.
4. The minute flashes next. Press the + or – button to change the minute. Press the E button to accept the minute.
5. The digital display will turn off. You may close the top cover or choose to program another setting.

For more information, refer to your User Manual. [ Download PDF version  ]

Need a new set of keys for your ATR440 clock? Replacement ribbon? Time cards? Click here to visit the Acroprint Store for all your time clock supplies and accessories!